Adaptive AgroTech

Part Studio.

Adaptive AgroTech / Design to print
Parametric workspace

Curved sensor enclosure

Shape your idea. Inspect every dimension.

LIVE MODEL
Drag to orbitRight-drag to panScroll to zoom
X / Y / Z
Millimeters
Parametric solids · Inspect wall thickness and fit before printing.

From idea to printable part

A quick guide to Part Studio

Your design workflow

  1. Choose a part type and preset. Start with an enclosure, a custom extruded outline, a curved panel, a revolved profile, or a bracket.
  2. Set dimensions and features. All dimensions are in millimeters. Use the outline editor or radius–height profile for custom shapes. Add holes and slots where needed.
  3. Update and inspect. Orbit the model, check the mesh, and use the visual section to inspect internal geometry. Inspect any warnings before exporting.
  4. Save and export. Save a JSON project for later editing, then export STL or OBJ. Open the mesh in your slicer using millimeters; select material, orientation, infill, and supports.

Enclosures & lids

Corner radius defines the rounded footprint; enclosure walls remain vertical. Wall and floor dimensions define the cavity. Preview and export the body and lid separately. Lid clearance depends on your printer and material, so print a small fit test first.

Custom curved outlines

Drag outline points to change the top-view shape, or edit their coordinates for precision. Keep a simple closed outline without crossing edges. Extrusion adds height. Top scale and twist apply only to solid extrusions; curved panels and revolved profiles use dedicated controls.

Holes & slots

Choose X, Y, or Z to define the cut direction. These features pass through the whole part, including both opposing walls; they are not blind pockets. Position is measured in the plane perpendicular to the chosen axis.

What the geometry report tells you

Dimensions describe the exported bounding box. Solid volume describes the mesh, not a slicer's filament estimate. Separate components may need different placement in your slicer. A visual section is an inspection view and does not trim the exported model.

Keep the editable project

STL and OBJ contain a finished mesh. Save the JSON project to reopen and adjust the design parameters. Your designs are processed locally in this page.

Know the limits. This workspace supports the included parametric part families and cutouts. It does not edit imported STL files or replace a general CAD system. A watertight mesh is not a mechanical validation: check strength, wall thickness, clearances, overhangs, and printability before use.